Aerotech Hardware-Reload Cross-Reference
Aerotech 38mm Special Hardware Promotion, good for G, H, and I reloads
The official HPR motor vendor at NARAM-52 is Joe Hinton (Moto Joe) who sells HPR motors through
Giant Leap Rocketry,
and is well known throughout the Rocky Mountain region for providing HPR motors at every launch in Colorado and is
personally sponsoring the HPR Contest Awards at NARAM-52. Joe will have the most common if not all reloads
available from Aerotech and Cesaroni for competing in the HPR contest or obtaining your certifications,
but will need to know in advance if you are desiring L3 motors. Please contact Joe Hinton
in advance if you need a particular motor for your HPR project, and for availability of hardware to
borrow or buy, and he'll have it available for you at NARAM-52.
Check with Moto Joe for available L1, L2 and L3 certification discounts from Aerotech and free
hardware from Cesaroni (see below).|
The Aerotech Level 1-2-3 promotion includes the H123W-M reload kit for $9.99 (50% off MSRP), the J350W-M reload kit for $24.99 (50% off MSRP) and the M1297W-P reload for $179.99 (25% off MSRP). This offer is exclusively for individuals seeking Level 1, 2 or 3 certification, and customers must present their NAR or Tripoli certification paperwork to the participating dealer prior to purchase. The Level 1-2-3 promotion reload kits will be clearly marked "for certification flights only".
Cell Phone: 303-859-9728
Gary Rosenfield, President of Aerotech Consumer Aerospace
will be sponsoring the L1. L2 and L3 cerification awards at NARAM-52. Gary will be attending NARAM
so this will be a great chance to meet one of the most influential people in high powered rocketry
and a long time supporter of the NAR.|
Aerotech is running their annual Level 1,2,3 promotion through their dealers (on this page especially). H123W and J350W reloads are 50% off, and the M1297W reload is 25% off. retail..
||Bill Saindon of Balsa Machining will also be a HPR motor vendor at NARAM-52, along with his line of building materials, and plans to have the complete line of Aerotech's low power motors at the site. For high power he will have all 29mm re-loads and 38mm re-loads up to and including 38/720 (although there will be Inventory above the 38/720 level it will be sparse). Bill will also have Aerotech level 1, 2 & 3 cert motors available at greatly discounted prices (see their high power webpage). Currently two level 3 M1297W-P cert motors are available for any one wishing to certify to level 3 at Naram. In addition Balsa Machining will make available Hardware for all cert levels (at a very low rental fee) for any one buying the cert motors from us (certain conditions apply). This includes the 75/5120 case for the M1297W-P level 3 cert motor.|
|Dr. Jeroen Louwers at Cesaroni Technology has authorized for Moto Joe to give a free Pro-38 rocket motor hardware to whoever buys a suitable reload kit to obtain their Level 1 or Level 2 certification at NARAM-52. This is for a 2 grain (L1) H motor hardware or a 5 grain (L2) J motor hardware reloads.|
|From Moto Joe concerning the CTI promotion: Here are the possibilities for Certification flights using the Pro-38 hardware, The 2 grain case costs $33.00 and the typical two grain load costs about the same. A five grain case costs 52.00 while the typical 5 grain load costs about 56.50. When you get right down to it, this is an incredible deal for anyone planning to Certify L1 (8 loads to chose from) or L2 (8 loads to chose from) at NARAM 52 using a Cesaroni motor. I will try to build up stock of motor cases. Sorry - no hardware specials available for L3.|